1. Connect to Wi-Fi

Configure Wi-Fi Network

Set up your wireless internet router using 1stPayPOS System Requirements, and PCI Compliance Standards:

  • Must be Broadband Internet Connection with local Wi-Fi
  • Wireless router encryption should be set to WPA2.
  • Wi-Fi passwords should be changed from the factory default to a minimum 13-character password
  • Wireless routers must be kept out of customers' plain sight, and secured against easy access
  • Wireless routers used for POS system should be separate from customer-accessed Wi-Fi network
  • Wireless network SSID (the name assigned to the wireless network) should not contain the business name or be the default factory name
  • SNMP community strings should be changed or disabled
  • Wi-Fi network should support multicast and/or Apple BonjourŽ
  • Please consult your wireless router user manual for assistance with adjusting these settings.

Connect to Wi-Fi

On your iPadŽ, go to "Settings", "Wi-Fi", and "connect to your Wi-Fi network".

Back of Printer 100/10Base

2. Connect Printer

Connect Ethernet cable into the 100/10BASE port on the back of the Star Receipt Printer. Plug the other end of the Ethernet cable into a LAN port on your wireless router. Then plug the power cord into a grounded AC outlet.

When connected, the printer "Ready" light will
blink green, then turn solid green.

3. Connect Cash Drawer

Connect the Cash Drawer cable into the "DK" port on the printer.

Back of Printer DK Port
Printers Menu

4. Print Test Receipt

  1. Open the 1stPayPOS app on your iPad and sign in with your PIN.
  2. Tap the left side menu, then tap "Settings" - "Printers" - "Star Printer".
  3. Tap "Configure Printer".
  4. Tap the printer name after the app locates your printer on the Wi-Fi network.
  5. "Printer Configured" message will display.
  6. Tap "Test Receipt".

View User Manual

5. Assemble iPad Stand

Windfall Stand Setup

Also view iPad mini installation

@Rest Stand Setup

Card Reader

6. Connect Card Reader

uDynamo:

Insert the uDynamo card reader into the audio port of your iPad.
NOTE: The uDynamo must be charged every 300 swipes. A USB cable is provided to allow charging.

iDynamo:

Attach the appropriate connector to the iDynamo card reader. Insert the iDynamo into the dock port on your iPad.

Bar Code Scanner

7. Connect Bar Code Scanner

  1. Go to the Settings in your iPad, tap "Bluetooth" on the left side of the screen. Tap the "OFF/ON" switch to change it to "ON".
  2. Turn on the scanner by pressing the smaller button on top of the scanner until it beeps twice, low to high.
  3. The device should appear on the iPad as "Socket CHS"; select to pair the scanner to the iPad.
  4. Refer to your User Manual for detailed instructions.

View Quick Start Guide or User Manual